Turn over the manipulator of board after the automatic production line of anode plate
Abstract:
This graduation design turns over the manipulator of board after is an automatic production line anode plate of concerning copper industry of Yunnan .This part of main actions that I design are to stand up the anode plate of the level perpendicular condition, the carriage of the easy to anode plate, the mechanism mainly completes three workings in the process of move carry: Incline the direction headings up the running and keeps the direction of vertical the running and levels the running that square heading up.
Through the research to the original equipments with use for reference, study to match in our own production line .At the time of carrying out to keep the direction of vertical ascend exercise, adopted to increase two forms that lead to the arm, for the purpose of removal steady .To control the arm of screws' start and stop ,and the stroke ,is complete to depend on a few strokes switch of change toward valve to change the position .This design accumulated the light, machine ,electronic, liquid technique .And this production line has already throw to produce, work normally, they still need to be improved.
A design point is the hydraulic pressure design part .Mainly include :Carrying component's speed, load, power analyses; The design of hydraulic pressure system principle chart ;The choice and the calculation of the component of hydraulic pressure; Gather block's design and calculation etc.
Key words: Turn over the machine of flake; Production line; Anode plate; Hydraulic pressure system; the gather block.
豫公網安備 41072402000322號
熱門關鍵詞：
