QH6型16t電動葫蘆
產品簡介:
直接安裝的QH型電動葫蘆,該葫蘆的鋼絲繩卷簡兩端鋼結構的四周都裝備安裝孔,在任意位置均可安裝。采用合適的安裝方式,可以在任一角度上引出鋼絲繩。
QH directly installed electric hoist, the hoist steel wire rope ends around the simple volume are equipped with mounting holes, can be installed in any location. Use appropriate methods to install, can lead to any angle rope.
標準凈空高度單梁電動葫蘆,用于單軌道系統的單梁起重機,行走機構的走輪寬度可調節。
Standard headroom electric hoist single girder, single-track system for single-beam crane, the wheel width of the walking mechanism can be adjusted.
運行小車和驅動電機的設計使載荷分布均勻,運行平穩、噪聲低,充分保證載荷迅速準確吊運到位。
Running car and drive motors are designed to make load distribution, stable, low noise, fully guaranteed lifting loads quickly and accurately in place.
固定式和移動式QH電動葫蘆,根據您的使用環境選擇使用,盡可能地節約您的投資。
QH fixed and mobile electric hoist, depending on your use of the environment choose to use, save your investment as much as possible.
QH5、QH6鋼絲繩電動葫蘆重要性能指標:
a、起重量:5000-32000kg
b、起升高度:6-120m
c、起升速度:單速8、10、12m/min 雙速:8/0.8、10/1、12/1.2m/min
d、運行速度:單速12.5、20、32m/min 雙速:12.5/3、20/5、32/8m/min
e、防護等級:IP54
f、絕緣等級:F
g、機構工作級別:M3M4M5M6(相當于DIN1Bm、1Am、2m、3m)
h、電源:三相交流50Hz、380v、控制電壓36v(或42v) ...